Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: Fiskars PowerGear2 shears typically stick due to resin or sap buildup on the blades, a loose or dry pivot bolt, or misaligned blades. Regular cleaning, lubrication, and tightening the pivot screw usually resolve the issue.
When your shears start to stick, it’s often not a manufacturing defect. Here are the most frequent culprits:
Here’s a step-by-step process to get your shears cutting smoothly again:
If the problem continues, inspect the spring mechanism (on some models) and make sure it’s seated properly. For aggressive sticking, remove the pivot bolt completely, separate the blades, clean and lubricate the inner surfaces, then reassemble.
To keep your shears from sticking in the future, adopt these habits:
If your shears are severely bent, have a cracked handle, or the blade coating is worn off, it might be time for a new pair. Also, if the blades have a large gap even when fully closed, they will never cut cleanly, and that often causes sticking. Replacement is sometimes more cost-effective than extensive repair. If you’re in the market, check out our best garden shears buying guide for reliable options that might fit your needs better.
The Fiskars PowerGear2 shears use a geared mechanism that multiplies your cutting force. This design reduces the effort needed to cut through thicker branches, but it also means the pivot area experiences higher stress than a standard pair of bypass pruners. The gear system relies on precise alignment between the blades and the internal cog. When debris or sap enters the gear housing, it can interfere with the smooth operation and cause the blades to stick or jam. Unlike simpler shears, the PowerGear2 has more internal parts, so maintenance should include cleaning not just the blades but also the area around the gears. A small brush or compressed air can help remove fine particles. Lubrication should reach the gear teeth as well as the pivot bolt. If you notice a grinding sensation, stop using the shears and inspect the gear mechanism for foreign objects or wear. Over time, the gears can wear down, especially if you frequently cut tough materials. In that case, replacement may be the best option.
Not all lubricants are suitable for garden tools. The best choice is a lightweight, non-greasy oil that penetrates tight spaces and does not attract dust. Mineral oil is a common recommendation because it is inexpensive, odorless, and safe for plants. Dedicated tool lubricants, such as those containing PTFE or silicone, also work well and tend to last longer. Avoid heavy grease, which can trap grit and cause more sticking. Vegetable oil and cooking sprays are not ideal because they can become sticky over time and may go rancid, attracting pests. WD-40 is acceptable for cleaning and light lubrication, but it is not a long-term lubricant; it evaporates relatively quickly. For best results, apply a few drops of your chosen lubricant to the pivot bolt, the gear teeth, and along the blade edges. Open and close the shears several times to work it in, then wipe off any excess with a clean cloth. Reapply monthly during heavy use, or more often if you cut sappy plants. If you use your shears in wet conditions, dry them thoroughly before lubricating to prevent trapping moisture.
Even well-intentioned maintenance can sometimes worsen the problem. Here are mistakes to avoid:
By avoiding these mistakes, you can keep your shears in good working order and reduce the likelihood of sticking.
Yes, vegetable oil works in a pinch, but it can go rancid and attract dust. Mineral oil or a dedicated tool lubricant is better because it doesn’t gum up over time.
If cleaning and oiling don’t help, check the pivot bolt for wear. Sometimes the threads strip, or the bolt becomes too loose to hold tension. Also, inspect the blades for tiny nicks or burrs that cause friction. A fine file can smooth small burrs.
New shears often have a factory coating or grease that can make them slightly stiff. Wipe off any excess, use a drop of oil, and work the handles open and closed a few dozen times. They should loosen up.
By addressing the root cause, you can extend the life of your shears and enjoy smooth cutting. Regular maintenance is the key.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.