Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: To clean and lubricate Fiskars PowerGear2 shears, disassemble them (if possible), wipe off all dirt and sap with warm soapy water, dry thoroughly, apply a light machine oil or silicone spray to the pivot and blade surfaces, then reassemble and adjust tension. Regular maintenance every few months or after heavy use will keep them performing at their best.
Fiskars PowerGear2 shears are known for their gear mechanism that multiplies cutting power, but like any tool, they need care. Over time, sap, dirt, and plant debris can build up on the blades and in the pivot joint, causing friction and rust. This not only makes cutting harder but can also damage the blades and the gear. Lubrication reduces friction, prevents corrosion, and ensures the gear mechanism operates smoothly. Regular maintenance extends the life of your shears and keeps them feeling like new.
Gather these supplies (most you likely have at home):
Note: Avoid harsh chemicals or solvents that can damage the coating on the blades or the plastic handles.
Step 1: Disassemble if possible. Many Fiskars PowerGear2 models have a screw or nut at the pivot. If you can remove it, disassembly makes cleaning much easier. Place the screw in a safe spot. If you’re not comfortable disassembling, you can clean without it, but be thorough around the pivot.
Step 2: Wipe off loose debris. Use a dry cloth to remove any dirt, leaves, or chunks of plant matter from the blades and handles.
Step 3: Soapy water wash. Mix a few drops of dish soap in warm water. Dip a cloth or sponge in the solution and wipe down the blades, pivot area, and handles. For stubborn sap, use a cloth dampened with rubbing alcohol and rub gently. Avoid submerging the whole tool in water; just wipe the surfaces. If you’ve disassembled, you can soak the metal parts briefly, but dry them immediately.
Step 4: Scrub the pivot. Use the toothbrush dipped in soapy water to scrub the pivot joint and gear teeth (if visible). This is where most gunk accumulates. Be gentle to avoid bending the gear teeth.
Step 5: Rinse and dry completely. Wipe off all soapy residue with a clean damp cloth, then dry with a dry towel. Make sure there is no moisture left, especially on the blades and in the pivot, to prevent rust.
Once clean and dry, it’s time to lubricate. The goal is to reduce friction without making the tool oily or attracting dirt.
Apply a small drop of machine oil or a light coat of silicone spray to the pivot area, where the blades meet. Also add a drop to the gear mechanism if accessible. Then open and close the shears several times to work the lubricant in. Wipe off any excess with a clean cloth.
For the blade surfaces, you can apply a very thin film of oil to protect against rust, but be careful not to get oil on the handles, as they can become slippery. Some users prefer to apply a paste wax (like car wax) to the blades for smoother cutting, but that’s optional.
If you’ve disassembled, lubricate the screw or bolt before reassembly. Then tighten the pivot so that the shears open and close smoothly without being too loose. Over-tightening can cause friction and wear; under-tightening can make the blades wobble.
How often should you clean? It depends on use. If you’re pruning regularly, a quick wipe and oil every few weeks is good. After a heavy pruning session, clean thoroughly. For occasional use, a maintenance session every couple of months works.
If you notice the shears getting stiff even after lubrication, check for debris in the pivot or a loose screw. If they still don’t cut well, the blades may need sharpening. Sharpening is a separate process; you can use a sharpening stone or file, but be careful to maintain the original bevel angle. If you’re unsure, take them to a professional.
If you’ve lost the original screw or it’s stripped, you can find replacements at hardware stores or contact Fiskars for parts.
Remember to always store your shears clean and dry, ideally hanging or with the blades closed to prevent accidental cuts and protect the edges.
Even with good intentions, some maintenance habits can do more harm than good. Here are the most frequent errors owners report and how to steer clear of them.
Using too much oil. A common mistake is over-lubricating. Excess oil attracts dirt, dust, and plant sap, creating a gritty paste that accelerates wear. Apply only a drop or two at the pivot and gear, then wipe away any excess. If you see oil pooling, you’ve used too much.
Neglecting the gear mechanism. The PowerGear2’s defining feature is its gear system, yet many people focus only on the blades. The gear teeth and the internal cam need lubrication too. If you can access them without full disassembly, apply a small amount of oil and work the handles to distribute it. If the gear feels rough or catches, it may need a deeper clean.
Sharpening the wrong angle. Fiskars blades have a specific bevel angle. Sharpening at a different angle can ruin cutting performance and void the warranty. If you’re not confident, use a Fiskars sharpener designed for your model or seek professional sharpening. Never use a power grinder, which can overheat the blade and remove too much metal.
Storing shears dirty or wet. Putting away shears with sap or moisture still on them invites rust and corrosion. Make cleaning and drying part of your routine before storage. A quick wipe with an oiled cloth after each use takes seconds and pays off long-term.
Forcing stiff blades. If the shears become hard to open or close, don’t force them. Forcing can bend the blades or damage the gear. Instead, investigate the cause: it’s usually debris in the pivot, a loose screw, or lack of lubrication. Address the root problem rather than applying more force.
With proper care, PowerGear2 shears can last for many years, but eventually even well-maintained tools reach the end of their life. Knowing when to repair and when to replace saves you time and frustration.
Signs repair is worthwhile: A loose pivot screw, minor rust spots, or a dull blade are all fixable. You can tighten the screw, remove rust with a fine abrasive pad and oil, and sharpen the blade. Replacement parts like screws, springs, and even blades are often available from Fiskars or aftermarket sellers. If the gear mechanism is intact and the handles are not cracked, repair is usually the better option.
Signs replacement is the better choice: If the gear teeth are stripped or broken, the handles are cracked or severely damaged, or the blade has a deep chip or crack, replacement is likely necessary. These issues compromise safety and cutting performance, and repairs may cost more than a new pair. Also, if the shears have been left outside for extended periods and are heavily rusted, the metal may be weakened beyond safe use.
Warranty considerations: Fiskars offers a limited lifetime warranty on many of its products, including PowerGear2 shears. Check the warranty terms for your specific model. If the damage is due to a manufacturing defect, you may be eligible for a replacement. However, normal wear and tear, misuse, or improper maintenance are typically not covered. Keep your receipt or proof of purchase.
Upgrade vs. like-for-like replacement: If you’re replacing, consider whether your needs have changed. PowerGear2 comes in various sizes and configurations, such as bypass pruners, hedge shears, and loppers. If you frequently cut thicker branches, a model with a larger cutting capacity might serve you better. If you have smaller hands, a compact version could offer more control. Think about the tasks you do most and choose accordingly.
Yes, WD-40 can be used as a cleaning solvent and light lubricant, but it’s not a long-lasting lubricant. It can evaporate quickly and may not provide the best protection. For longer-lasting results, use a dedicated light machine oil or silicone lubricant.
Not always, but it helps if you can. If you avoid disassembly, you need to be extra careful to clean around the pivot and gear. However, periodic disassembly (once a year) allows for a deeper clean and inspection of the gear mechanism.
No, never put any garden shears in the dishwasher. The high heat, moisture, and harsh detergents can damage the blades, handles, and gear mechanism. Always hand clean with mild soapy water.
For more tips on choosing and maintaining garden shears, check out our buying guide to see which models suit your needs.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.