Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: Streaks with a Wooster Sherlock roller usually come from using the wrong nap for your paint and surface, overloading the roller, or incorrect rolling technique. Fix it by matching the roller cover to your paint type and texture, loading it properly, and using a consistent W or M pattern with even pressure.
The Wooster Sherlock is a premium roller frame, but the cover you attach does the real work. If you’re seeing streaks, the nap (fiber length) is often the culprit. For smooth walls with satin or semi-gloss paint, a 3/8 inch nap is ideal. For textured surfaces or flat paint, a 1/2 inch nap helps cover more surface and holds more paint. Using a too-short nap on a textured wall can cause skipped spots and streaks. Conversely, a too-long nap on smooth walls may leave a stipple pattern that looks streaky. Check the paint can for recommended nap, and choose accordingly.
Overloading the roller is a common mistake. When you dip the roller fully into paint, it soaks up too much, and the excess drips and creates uneven lines. Instead, dip the roller only about halfway into the paint, then roll it back and forth on the ribbed section of the tray to distribute the paint evenly. You want the roller to look uniformly coated but not dripping. If you see dry spots on the roller, you’re not loading enough. Practice the ‘dip and roll’ until you get a consistent feel.
Even with a great roller like the Sherlock, technique matters. Many people roll in a straight up-and-down motion, which leaves visible lines. Instead, use a ‘W’ or ‘M’ pattern. Start by rolling a W shape on the wall, then fill it in with overlapping strokes without lifting the roller. This ensures even distribution. Always roll in one direction (e.g., from top to bottom) for the final pass to smooth out any marks. Keep a wet edge by working in sections and blending each new section into the previous while it’s still wet.
Pressing too hard on the roller flattens the nap and squeezes out paint, causing streaks. Let the weight of the roller do the work. Apply light, even pressure. Also, maintain a moderate, steady speed. Too fast and the roller flicks paint, too slow and you get heavy edges. The Sherlock frame has a unique cage design that allows for smooth rotation, so use it to your advantage. Practice on a piece of cardboard to get the feel of consistent pressure.
Sometimes streaks aren’t the roller’s fault. Low-quality paint may have poor leveling, meaning it doesn’t flow out evenly. Invest in good paint, and consider a paint additive like Floetrol for better leveling. Also, ensure the surface is properly primed and smooth. If you’re rolling over a previous coat that has patches, those will show through. Sand and clean the wall before painting. Also, avoid painting in extreme heat or cold, as that affects drying time and can cause streaks.
Old, worn roller covers can cause streaks. If your cover has matted fibers, shed lint, or has been used for multiple projects, it’s time to replace it. A fresh cover makes a huge difference. Also, clean your cover thoroughly after each use. If paint dries in the fibers, it hardens and creates uneven application. For best results, use a dedicated cover for each paint type (water-based vs. oil-based).
Selecting the correct roller cover is critical to avoid streaks. The Wooster Sherlock frame fits standard 9-inch covers, but not all covers are created equal. Consider these factors:
Matching the cover to your paint and surface is the single most effective way to prevent streaks. If you’re unsure, consult the paint manufacturer’s recommendations or ask a paint store professional.
Proper maintenance of your roller frame and covers ensures consistent results and extends their life. Here are key practices:
By maintaining your tools, you’ll not only prevent streaks but also save money in the long run.
Even experienced painters can make mistakes that lead to streaks. Watch out for these common pitfalls:
Avoiding these mistakes will dramatically improve your results.
Yes, the Sherlock frame fits standard 9-inch roller covers, so you can use any brand. However, for best streak-free results, pair it with a high-quality cover like Wooster’s own or other premium brands. The frame’s design helps minimize splatter, but the cover determines finish.
If the paint is dry, you can sand the streaks lightly with fine-grit sandpaper, then apply a thin coat of paint with the correct technique. If the streaks are minor, a second coat may cover them. If they’re severe, you might need to prime and repaint.
It depends on the texture. For smooth walls, 3/8 inch is better for a smoother finish. For slightly textured or rough surfaces, 1/2 inch provides better coverage. Using a too-long nap on smooth walls can leave an orange peel texture, which might be mistaken for streaks.
For more tips on choosing the right roller for your project, check out our best paint rollers guide. It covers top-rated rollers and covers to help you achieve a professional finish.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.