★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Pet Supplies › Why Does My Dog’s Raincoat Smell? Causes, Fixes, and Prevention
Pet Supplies

Why Does My Dog’s Raincoat Smell? Causes, Fixes, and Prevention

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: Your dog’s raincoat smells because moisture gets trapped inside the fabric, creating a breeding ground for mildew and bacteria. The smell often comes from the inner lining, which stays damp after walks, especially if the coat is made of non-breathable materials. But there are simple fixes to eliminate the odor and prevent it from coming back.

Why Does the Smell Happen?

Raincoats are designed to keep your dog dry, but they often trap moisture between the outer waterproof layer and your dog’s fur. When your dog runs, plays, or simply walks in the rain, their body heat creates condensation inside the coat. If the fabric doesn’t breathe well, that moisture stays put, and warm, damp conditions are perfect for mildew and bacteria to grow. These microorganisms release volatile organic compounds, which we perceive as a musty, sour, or even ammonia-like smell.

Another culprit is the material itself. Many budget raincoats use PVC or nylon with a polyurethane coating, which are not breathable. They keep rain out but also keep sweat and humidity in. Over time, the inner lining absorbs oils, dead skin cells, and dirt from your dog’s coat, which adds to the odor. If you don’t dry the coat thoroughly after each use, the smell becomes stronger.

How to Remove the Smell from Your Dog’s Raincoat

First, check the care label. Most dog raincoats are machine washable, but some require hand washing. If machine washable, use a gentle cycle with cold water and a mild, pet-safe detergent. Avoid fabric softeners and bleach, as they can damage the waterproofing and irritate your dog’s skin.

For a deeper clean, create a solution of white vinegar and water (1:3 ratio) and soak the coat for about 30 minutes. Vinegar neutralizes odors and kills mildew without harsh chemicals. Rinse thoroughly and then wash with detergent. Another option is baking soda: sprinkle it inside the coat, let it sit for a few hours, then vacuum or brush it off before washing.

After washing, dry the coat completely. Tumble dry on low heat is usually safe, but air drying is better. Hang it in a well-ventilated area, preferably in sunlight, as UV rays help kill odor-causing bacteria. Make sure the inside is completely dry before storing.

How to Prevent the Smell from Coming Back

The key is to keep the coat dry and clean. After every use, wipe the outside with a damp cloth to remove rain and dirt, then hang it to dry. Do not fold it up wet. If the coat has a removable inner lining, take it out and dry it separately.

Choose a breathable raincoat. Look for materials like Gore-Tex, breathable nylon, or coated fabrics that allow moisture to escape while still repelling rain. Some coats have mesh linings that promote airflow. If you’re shopping for a new one, check out our top picks for breathable dog raincoats that reduce odor buildup.

Also, let your dog’s coat air out a bit after a walk before putting the raincoat on. If your dog has long fur, trim it around the chest and belly to reduce moisture retention. And don’t forget to regularly clean the coat, especially during rainy seasons.

When to Replace the Raincoat

If you’ve cleaned it thoroughly and dried it properly, but the smell persists, it might be time for a new coat. Mildew can penetrate the fabric and become impossible to remove completely. Also, if the waterproofing starts peeling or leaking, the coat is no longer effective. Replacing it ensures your dog stays dry and comfortable, and you don’t have to deal with a smelly coat.

How to Choose the Right Fit for Your Dog’s Raincoat

A proper fit is crucial not just for your dog’s comfort and freedom of movement, but also for preventing the moisture buildup that leads to odors. A raincoat that is too tight can restrict movement and trap heat, causing your dog to sweat more. Conversely, a coat that is too loose allows rain to seep in through gaps, soaking the fur underneath. Both scenarios create a damp environment inside the coat.

To measure your dog, use a soft tape measure. You will need three key measurements: the length from the base of the neck to the base of the tail (back length), the widest part of the chest (girth), and the neck circumference. Compare these to the manufacturer’s sizing chart, as sizes vary between brands. Always prioritize the girth measurement; if your dog is between sizes, it’s usually better to size up for adjustability, but ensure the coat still covers the back adequately.

Look for adjustable features such as hook-and-loop straps around the chest and neck, or elasticized leg openings. These allow you to customize the fit to your dog’s unique shape. For dogs with broad chests or narrow waists, a coat with multiple adjustment points is ideal. Also, consider the coat’s cut: a full-coverage style with sleeves may offer more protection but can be warmer, so it’s better for cold, rainy days. A simpler cape-style coat is easier to put on and allows more airflow, which can help reduce sweating.

After you put the coat on, check for gaps around the neck and legs. You should be able to fit two fingers under the straps, but not more. The coat should not slide around when your dog walks or runs. If it does, adjust the straps or consider a different size. A well-fitted raincoat will stay in place, keep your dog dry, and allow enough ventilation to minimize condensation.

Common Mistakes to Avoid with Dog Raincoats

Even with the best intentions, owners often make mistakes that lead to a smelly raincoat or an uncomfortable dog. Being aware of these pitfalls can save you time and frustration.

Mistake 1: Putting the coat on a wet dog. If your dog is already wet from a previous walk or a bath, putting a raincoat on top traps that moisture inside. Always ensure your dog is completely dry before dressing them in any coat. If they get wet during a walk, dry them off thoroughly before removing the raincoat, and then dry the coat itself.

Mistake 2: Not drying the coat properly. Simply hanging the coat in a damp mudroom or bathroom is not enough. It needs to dry in a well-ventilated area, preferably with good air circulation. If you hang it in a closed closet, mildew will grow. Use a drying rack or hang it outside in the sun when possible. Make sure the inside lining is dry, not just the outer shell.

Mistake 3: Using the wrong detergent. Harsh detergents, fabric softeners, and bleach can strip the waterproof coating and leave residues that irritate your dog’s skin. They can also leave behind perfumes that mask odors but don’t eliminate the bacteria. Always use a mild, pet-safe detergent and avoid any additives.

Mistake 4: Storing the coat while damp. Never fold or stuff a damp raincoat into a bag or drawer. Even if it feels only slightly damp, that moisture will encourage mildew growth. Always let it dry completely before storing it in a cool, dry place.

Mistake 5: Ignoring the need for a breathable material. If you live in a humid climate or your dog is active, a non-breathable coat will almost certainly lead to odor issues. Invest in a coat with breathable fabric and features like mesh linings or vents. It may cost a bit more, but it will save you cleaning time and keep your dog more comfortable.

Mistake 6: Overlooking regular cleaning. Even if the coat doesn’t look dirty, it accumulates oils and bacteria from your dog’s skin and fur. A quick wipe-down after each use and a monthly wash during rainy season will prevent odors from taking hold.

Alternatives to Traditional Raincoats

If you’ve tried several raincoats and still struggle with odors, or if your dog simply dislikes wearing one, there are alternatives that might work better for your situation.

Rain suits with full coverage: Some dogs, especially those with long hair or those who love to splash in puddles, benefit from a full-body rain suit that covers the legs and belly. These suits often have breathable panels and are designed to minimize exposed fur. However, they can be warmer, so they are best for cooler weather. The key is to choose a suit with ventilation, such as mesh under the belly or along the back.

Umbrellas and rain shields: For dogs that refuse to wear coats, a dog-specific umbrella or a rain shield that attaches to a leash can provide some protection. These are not as effective in heavy rain or wind, but they allow maximum airflow and eliminate the risk of trapped moisture. They are also easy to dry and store.

Drying coats and towels: If your dog only needs protection for short trips outside, a quick-drying towel or a microfiber drying coat might be sufficient. These are not waterproof, but they absorb moisture and can be worn indoors until your dog dries off. They are machine washable and dry quickly, reducing the chance of mildew.

Waterproof sprays for existing coats: If you already have a raincoat that is not breathable, you can apply a waterproofing spray to the outer fabric to enhance its rain-repellent properties. This won’t make it breathable, but it can help keep the outer layer dry, reducing the amount of moisture that seeps in. Reapply according to the product instructions, and always clean the coat first.

Consider a different material: Some dogs do well with coats made from natural fibers like waxed cotton, which is water-resistant and breathable. Waxed cotton can develop a distinct smell over time, but it is usually the wax itself, not mildew. It can be re-waxed to maintain performance. However, waxed cotton is not fully waterproof and may not be suitable for heavy rain.

When choosing an alternative, consider your dog’s breed, coat type, activity level, and the climate you live in. What works for a short-haired dog in a mild climate may not work for a thick-coated breed in a wet, cold region. The goal is to keep your dog dry and comfortable without creating a moist environment that breeds odor.

Frequently Asked Questions

Can I put my dog’s raincoat in the dryer?

It depends on the material. Check the label. If it says tumble dry low, you can, but air drying is safer to prevent damage. High heat can melt the coating or shrink the fabric. Always ensure the coat is completely dry before storing.

Is the smell harmful to my dog?

The smell itself is not usually harmful, but mildew and bacteria can cause skin irritation or allergies, especially if your dog has sensitive skin. It’s best to address the odor promptly to avoid any health issues.

How often should I wash my dog’s raincoat?

At least once a month during rainy season, or more often if it gets dirty or starts to smell. Regular spot cleaning after each use will extend the time between washes.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.