Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: Coverlet pillow shams typically slip off because they are designed to be decorative and have a looser fit than standard pillowcases, especially if the sham is larger than the pillow or the fabric is smooth. Additionally, the absence of an inner flap or secure closure, combined with the pillow’s weight and the slickness of the sham’s material, contributes to the shifting. But you can fix this with simple adjustments like using a properly sized pillow, adding non-slip grips, or sewing a simple closure.
Coverlet pillow shams are often made with a decorative border and a back opening that may have an overlapping flap or just a single piece of fabric. Unlike standard pillowcases, which are snug and fully enclosed, shams are meant to sit against the headboard and are not intended for nightly sleep. Because they are more for show, they are often cut slightly larger than the pillow insert to allow for the decorative flange (the fabric border). This extra space means the pillow can shift around and eventually slide out, especially if the sham is more than two inches larger than the pillow.
The material of your sham plays a huge role. If your coverlet set is made from a smooth fabric like silk, satin, or high-thread-count cotton, the pillow can easily slide on the surface. The friction between the pillow and the sham is low, so any movement, even from a slight breeze or adjusting your bedding, can cause slippage. On the flip side, if the back of the sham is smooth and the front is textured, the pillow might still move around inside. In short, the slicker the fabric, the more likely you’ll be chasing your pillow around.
Most coverlet shams are designed for standard, queen, or king pillows. If you are using a pillow that is smaller than the sham, there’s too much room for movement. For example, a standard sham (20×26 inches) fits a standard pillow (20×26 inches), but if you use a 16×20 throw pillow inside, it will slide around. Conversely, if you stuff a king pillow into a queen sham, the sham won’t close properly and the pillow will pop out. Also, consider the pillow’s fill. Down and feather pillows are pliable and can mold, but they also shift more than firm foam or polyester pillows.
There are several easy, DIY solutions:
When you’re shopping for a new coverlet set, look for shams that have a snug fit or come with a closure. Some sets advertise “anti-slip” or “no-slip” shams, which often have a non-slip coating on the back or a design that keeps the pillow in place. Also, check the dimensions: a sham that is less than 2 inches larger than the pillow will shift less. If you’re in the market for a new set, our detailed coverlet set buying guide can help you pick a set with well-designed shams.
Getting the right fit starts with accurate measurements. Use a soft tape measure to measure your pillow from seam to seam along the longest side (length) and the shortest side (width). Then measure the sham’s interior dimensions, not the exterior with the flange. The sham’s interior should match the pillow’s dimensions within half an inch. If the sham is larger, you have two options: buy a larger pillow insert or add a filler layer. For a temporary fix, you can place a folded towel or a thin blanket inside the sham behind the pillow to take up the slack. This reduces movement without altering the sham. When measuring, also note the depth of your pillow. A pillow that is too thick will strain the sham’s seams and may cause the closure to gap. Standard pillows are about 5 to 6 inches thick, while queen and king pillows can be 6 to 8 inches thick. Choose a sham that accommodates your pillow’s loft.
Proper care can extend the life of your shams and help them maintain a snug fit. Always follow the manufacturer’s care instructions, but here are some general guidelines. Wash shams in cold water on a gentle cycle to minimize shrinkage and fabric wear. Hot water can cause natural fibers to shrink unevenly, which may distort the sham’s shape and lead to a looser fit. Tumble dry on low heat or air dry flat. High heat can damage elastic fibers or non-slip coatings. If your sham has a zipper or Velcro closure, fasten it before washing to prevent snagging. Over time, repeated washing can soften fabrics and reduce friction, making slippage more likely. To restore grip, you can apply a fabric spray designed to add texture, or sew small strips of non-slip material to the inside. Also, rotate your pillows and shams regularly to distribute wear evenly. If you notice the sham’s seams are stretching, consider reinforcing them with a few hand stitches. Finally, avoid overstuffing the sham, as this puts stress on the fabric and closures, leading to premature wear and a poor fit.
Many people inadvertently make the problem worse by using the wrong solutions. Here are mistakes to avoid. First, don’t use safety pins on the outside of the sham, as they can snag other bedding and look unsightly. If you must pin, keep pins hidden inside. Second, avoid using double-sided tape on delicate fabrics; it can leave residue or pull threads. Third, don’t assume a larger pillow will solve the problem. An oversized pillow can distort the sham and cause seam damage. Fourth, don’t ignore the pillow’s condition. A lumpy or compressed pillow will shift more; replace old pillows. Fifth, don’t overlook the sham’s closure. If the opening is stretched, sewing it tighter or adding a new closure can help. Sixth, don’t wash shams with heavy items like jeans or towels, as the agitation can stretch them. Seventh, don’t dry shams on high heat, which can shrink them unevenly. By avoiding these mistakes, you’ll keep your shams looking good and staying put.
Yes, but it will look different. Regular pillowcases are smaller and have no flange, so they won’t give the tailored, decorative look. If you prefer function over form, you can use a pillowcase, but it may not match the coverlet’s aesthetic.
Not necessarily. A pillow that is too large will strain the seams and may not fit inside the sham properly. The key is to match the pillow size to the sham’s intended size. For example, if your sham is 20×26, use a standard pillow that is 20×26.
Yes, you can sew a strip of non-slip fabric (like shelf liner) to the inside of the sham, or add a flap with velcro. This is a permanent solution that won’t change the appearance from the outside.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.