Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: To install a bathroom storage tower without damaging tile, use non-permanent mounting methods like freestanding towers or adhesive strips, and if you must drill, do it into grout lines or use a diamond-tipped hole saw with masking tape to prevent cracks.
Most bathroom storage towers come with mounting brackets that require drilling holes into your tile. The problem? Tile is brittle, and drilling directly into it often causes cracks, chips, or even shattered tiles. Even if you avoid cracking, the holes remain after you remove the tower, leaving unsightly marks. Plus, if you live in a rental, any holes can cost you your security deposit.
The good news is that there are several ways to install a storage tower without ever touching the tile. If you absolutely must drill, there are techniques that minimize damage. Let’s explore the best methods, starting with the safest.
The easiest way to avoid tile damage is to skip the wall entirely. Freestanding bathroom storage towers are designed to stand on their own, often with adjustable feet to keep them level on uneven floors. Many models come with a back panel that can be anchored to the wall for safety, but you can simply skip that step if you’re not worried about tipping (especially if you have small children or pets).
When choosing a freestanding tower, look for one with a wide base and a low center of gravity. Some even have a built-in anti-tip strap that you can attach to the wall using a small adhesive hook instead of drilling. This gives you the safety of anchoring without any holes in your tile.
If you already have a wall-mounted tower or prefer the look, heavy-duty adhesive strips are your best friend. Products like Command strips are designed to hold significant weight, but you need to choose the right type and apply them correctly.
This method works best on smooth, glossy tile. If your tile is textured or matte, the strips won’t stick well, and you’ll need to consider another option.
If you must drill, your best bet is to drill into the grout lines rather than the tile itself. Grout is much softer than ceramic or porcelain, making it easier to drill and patch later. Here’s how to do it safely:
If you ever need to remove the tower, you can fill the holes with grout repair compound, and the damage will be nearly invisible.
Sometimes you have no choice but to drill through the tile itself. If so, follow these steps to minimize the risk of cracking:
Even with perfect technique, you might still get minor cracks. That’s why the grout method or adhesive strips are always preferred.
If you’re looking for a creative solution that requires zero drilling or adhesive, consider a tension rod tower. These towers fit between the floor and ceiling, using spring tension to stay in place. They’re perfect for renters or anyone who wants a temporary solution.
To install, simply extend the rod until it’s snug between the floor and ceiling, then tighten the lock mechanism. Some models come with adjustable shelves that you can customize. This method is completely reversible and won’t leave any marks.
Can I use mounting tape on textured tile?
Mounting tape won’t adhere well to textured tile because the surface isn’t flat enough for full contact. Instead, consider a freestanding tower or use grout line drilling. If you must use tape, clean the tile thoroughly and press extra hard, but expect reduced holding power.
What if I accidentally crack a tile?
If you crack a tile, you can repair the crack with a color-matched epoxy or tile repair kit. For small cracks, you can also fill them with white glue and press the piece back down. For larger cracks, you may need to replace the tile, which is a more involved project. Prevention is key, so always use the gentlest method possible.
How do I remove adhesive strips without damaging the tile?
To remove adhesive strips, use a hairdryer to warm the adhesive for a few minutes. Then gently pull the strip down and outward at a 45-degree angle. If any residue remains, use a bit of rubbing alcohol or a citrus-based cleaner. This should leave your tile untouched.
Now that you know how to install without damage, you’ll want to pick the right tower for your space. Consider the height, number of shelves, and whether you need a mirrored door or open shelving. For small bathrooms, a narrow tower that fits into a corner can maximize vertical storage. Also, check the weight capacity and materials; bamboo and teak are moisture-resistant and look great.
If you’re overwhelmed by the options, check out our 7 Bathroom Storage Ideas to Organize Small Spaces in 2026 for curated suggestions that balance style and function.
Remember, the best installation method is the one that causes the least damage. Start with freestanding or adhesive options, and only resort to drilling if absolutely necessary. With these techniques, you can enjoy your new storage tower without worrying about unsightly damage to your beautiful tile.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.