Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: To use a compass for hiking, hold it flat, point the direction of travel arrow at your landmark, rotate the bezel until the red end of the needle aligns with the orienting arrow (and the north end of the needle points to N on the bezel), then read the bearing at the index line. Follow that bearing by keeping the needle aligned as you walk. But that’s just the basics; this guide covers declination, map reading, and practical tips.
Before you hit the trail, know the essential parts of a baseplate compass: the baseplate (clear plastic), the direction of travel arrow (on the baseplate), the rotating bezel (with degree markings), the index line (where you read the bearing), the orienting arrow (inside the bezel), and the magnetic needle (red end points north). Some compasses also have a declination adjustment screw, which is helpful for accurate map use.
Most hiking compasses are ‘baseplate’ or ‘orienting’ compasses. They are simple and reliable. You can find a variety of styles and price points; if you’re just starting, a basic model works. For more details on choosing one, check out this compass buying guide.
Suppose you see a mountain peak and want to know its bearing from your position. Hold the compass flat in your hand, with the direction of travel arrow pointing straight ahead at the peak. Rotate the bezel until the orienting arrow lines up with the red end of the needle (the needle’s north end). Ensure the needle is inside the orienting arrow, not opposite. Read the number at the index line; that’s your bearing in degrees.
For example, if the index line reads 270, the peak is due west. Practice at home by picking objects in your neighborhood. This skill is the foundation for navigation.
Once you have a bearing, you need to walk in that direction. Hold the compass in front of you, with the direction of travel arrow pointing ahead. Rotate your body until the red needle aligns with the orienting arrow (and the red end points to N on the bezel). Then, look up and pick a distant landmark (a tree, rock) that lies exactly on that line. Walk to that landmark, then repeat. This technique prevents you from veering off course.
Important: Keep the compass level and away from metal objects (like your phone or belt buckle) to avoid interference. If you have a declination adjustment, set it before you start (see next step).
Declination is the angle between magnetic north (where the needle points) and true north (the top of maps). It varies by location and changes over time. To use a map accurately, you must adjust for declination. There are two ways: use a compass with an adjustable declination feature (set it once for your area), or do the math manually.
If your compass has a declination screw, turn it so the orienting arrow is offset from the index line by the declination for your region (find it on a topographic map or online). For manual adjustment: if declination is east, add it to your map bearing when converting to magnetic; if west, subtract. For magnetic to map, do the opposite. Example: if declination is 10° east, and your map bearing is 45°, your magnetic bearing is 55°. Always note the year of declination data, as it changes.
This is a core skill for navigation. Place your compass on the map with the edge along your intended path (from point A to point B). Make sure the direction of travel arrow points toward your destination. Rotate the bezel so the orienting lines inside the bezel are parallel to the map’s north-south grid lines (not the magnetic lines, unless adjusted). The index line now gives you the true bearing. Adjust for declination (as above) to get the magnetic bearing. Then, as in Step 2, follow that magnetic bearing in the field.
Practice at home with a local map: plot a route, find the bearing, and then simulate taking it outside. This is the most reliable way to navigate without a GPS.
If you’re lost, you can use triangulation to determine your position. Identify two or three prominent landmarks around you that you can also locate on your map. Take a bearing to each landmark (using the method in Step 1). Then, adjust each bearing from magnetic to map bearing (reverse the declination). On your map, draw a line from each landmark in the opposite direction of the bearing (using your compass as a protractor). The point where the lines intersect is your approximate location. With three landmarks, you get a triangle; your position is inside it.
This method takes practice. Start with two easily identifiable features. Always double-check your bearings and make sure you’re using the correct declination.
It’s highly recommended if you plan to use a map. Without it, you’ll need to do the math each time, which is error-prone. Many compasses in the best compass guide have this feature.
Yes, for simple bearings and following a direction, but for navigation in unfamiliar terrain, a map is essential. A compass alone only tells you directions, not where you are.
Declination changes gradually, but it can shift significantly over decades. Check a current declination value for your area each season. Many compasses allow for easy adjustment.
With these steps, you’ll be navigating with confidence in no time. Remember, practice makes perfect, so try these techniques in a local park before heading into the wilderness.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.