★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Home & Kitchen › How to Set Up and Use Your FibraMent-D Pizza Stone for the First Time
Home & Kitchen

How to Set Up and Use Your FibraMent-D Pizza Stone for the First Time

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: To set up your FibraMent-D pizza stone for the first time, simply rinse it with water (no soap), dry it thoroughly, and place it on the middle oven rack. Then preheat the oven to your desired temperature (usually 500°F or higher) for at least 45 minutes to 1 hour. There is no need to season or oil the stone. Once heated, slide your pizza onto the stone and bake until the crust is golden and crispy. After cooling, clean with a dry brush or scraper, and store in a dry place.

Why First-Time Setup Matters

The FibraMent-D is a high-performance pizza stone made from a fiber-reinforced composite. It handles extreme heat (up to 900°F) and distributes heat evenly, giving you that restaurant-quality crust. But like any porous stone, it absorbs moisture. If you heat it too quickly or with moisture trapped inside, it can crack. That’s why the initial setup is crucial: you want the stone completely dry before the first bake.

Unlike some other stones, FibraMent-D does not need seasoning or oil. In fact, oil can create a sticky residue and affect the stone’s performance. Keep it simple: just water rinse and dry.

Unboxing and Initial Cleaning

When you first receive your FibraMent-D stone, it may have some dust or residue from manufacturing. Rinse it under warm running water. Use a soft sponge or cloth to wipe off any loose particles. Do not use soap, as the stone can absorb the soap and later impart off-flavors to your pizza. After rinsing, pat it dry with a towel and let it air dry completely for at least 24 hours. This ensures all internal moisture has evaporated.

If you’re in a humid environment, you can place the dry stone in a cool, unheated oven overnight to help it dry. Never put a damp stone into a hot oven; that’s a guaranteed way to crack it.

Placement in the Oven

Place the stone on the middle rack of your oven. This allows heat to circulate around it. Some people prefer the bottom rack for a darker crust, but the middle is a safe starting point. Ensure there’s at least 2 inches of clearance above the stone, so your pizza or any pan doesn’t touch the heating element.

If your oven has a broiler, avoid placing the stone too close to it, as the intense direct heat can cause thermal shock. Also, do not place the stone directly on the oven floor unless you have a dedicated pizza oven designed for that.

Preheating: The Key to a Crispy Crust

Preheat your oven to the highest temperature it can go, typically 500°F to 550°F. For FibraMent-D, you can go up to 900°F if you have a pizza oven or a high-heat setting. But for a standard home oven, 500°F is fine. The stone needs at least 45 minutes to 1 hour to fully absorb the heat. This ensures the stone is evenly hot, which transfers heat to the pizza instantly, creating a crisp bottom.

Don’t rush this step. A cold stone will result in a soggy crust. Some tips: use an infrared thermometer to check the stone’s surface temperature; it should read close to the oven temperature before you slide in the pizza.

Shaping and Sliding the Pizza

While the stone heats, prepare your pizza. Use a pizza peel (wooden or metal) dusted with cornmeal, semolina, or flour to prevent sticking. Shape your dough on the peel, add toppings, and then quickly slide it onto the hot stone with a quick forward and back motion. Work quickly to avoid the stone cooling down.

If you’re a beginner, start with a smaller pizza or a less sticky dough. You can also use parchment paper under the pizza, but note that it might burn at very high temperatures. If using parchment, trim it to just under the pizza to minimize burning.

Baking and Checking Doneness

Bake for about 8 to 12 minutes, depending on thickness and toppings. Watch for the crust to become golden brown and the cheese to bubble. Use a pizza peel to lift an edge and check the bottom: it should have brown spots (leopard spotting) and be crisp.

If you find the crust is not browning enough, you can move the stone to a lower rack for the last minute, or increase the oven temperature. But be careful not to burn it. Once done, remove the pizza from the stone immediately to prevent overcooking.

Cleaning and Maintenance

After use, let the stone cool completely in the oven. Do not remove it while hot; sudden temperature changes can crack it. Once cool, scrape off any residue with a metal spatula or a stiff brush. For stuck-on bits, you can rinse with water, but never soak the stone. Avoid soap. If the stone has absorbed food odors, you can heat it in the oven at 200°F for 15 minutes to burn off the residue.

Store the stone in a dry place. If you stack items on top of it, place a towel or paper between to prevent scratches. Over time, the stone will develop dark spots and stains; this is normal and adds character. It does not affect performance.

Common Mistakes to Avoid

  • Never preheat the stone empty in an oven that is cold: Always preheat the stone with the oven (start at a low temp like 200°F and ramp up if you’re worried, but actually you can just place the stone in the cold oven and set it to 500°F; that’s safe because the stone heats gradually as the oven heats).
  • Don’t use a wet cloth on a hot stone: It can cause thermal shock.
  • Avoid putting frozen dough on the stone: Thaw it first to prevent sticking and uneven baking.
  • Don’t use soap or dishwasher: The stone is porous and will absorb the soap.

For more detailed recommendations and comparisons with other pizza stones, check out our best pizza stones buying guide.

Frequently Asked Questions

Can I use my FibraMent-D stone on a grill?

Yes, you can. Place the stone on the grill grates and preheat the grill to 500°F or higher. The stone can handle the direct heat, but be sure to follow the same preheating and drying rules.

Why is my pizza sticking to the stone?

Sticking usually happens if the stone is not hot enough or the dough is too wet. Make sure you preheat the stone long enough and use enough flour or cornmeal on the peel. Also, don’t overtop your pizza with too much sauce, which can make the dough soggy.

How long should I wait before cleaning the stone after use?

Wait until the stone is completely cool to the touch. Then scrape off residue. If you need to rinse, use warm water and a brush, then dry it thoroughly. Never immerse a hot stone in water.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.