Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.
The short answer: To set up and pair your new smartwatch, first charge it fully, then turn it on and put it in pairing mode (usually by holding the side button). Next, install the companion app on your phone (like Wear OS, Samsung Galaxy Wearable, or Apple Watch app), enable Bluetooth, and follow the on screen prompts to scan and connect. Finally, grant necessary permissions and sync your data. The exact steps can vary by brand, but this general process works for most smartwatches.
Before you even think about pairing, make sure your smartwatch has enough battery. Most smartwatches come with a partial charge, but it’s best to fully charge them before first use. This prevents the watch from dying mid setup, which can cause connection issues. Place the watch on its charger and wait until the battery indicator shows a full charge. This can take 1 to 2 hours, depending on the model.
Also, ensure your phone is compatible. If you have an iPhone, you’ll be limited to the Apple Watch (if you bought that) or some Wear OS watches that support iOS, but many Android watches don’t work with iPhones. For Android, most watches work, but check the specific compatibility on the manufacturer’s website. Also, make sure your phone’s Bluetooth is turned on and that you have a stable Wi Fi or cellular connection for downloading apps and updates.
Once charged, turn on your smartwatch by pressing and holding the side button (usually the power button). You’ll see a welcome screen or a logo. If it’s a new watch, it might automatically go into pairing mode. If not, you’ll need to manually put it in pairing mode. For most watches, this is done by holding the side button for a few seconds until you see a message like “Pair with phone” or a Bluetooth icon. Some watches require you to swipe through settings and choose “Pair” or “Connect.” Check your watch’s manual for the exact method, but this is the general way.
For Apple Watch, you don’t need to put it in pairing mode manually; it automatically looks for your iPhone when you power it on. For Samsung Galaxy Watch, you hold the back button or open the apps screen and select “Settings > Connections > Bluetooth > Pair new device.” The key is to have the watch visible to your phone.
Your smartwatch will not pair directly via Bluetooth alone; it requires a companion app to manage settings, sync data, and update software. The app you need depends on your watch:
Install the app, open it, and create an account if needed. Some apps require you to log in to your Google or Samsung account. Make sure you allow the app to access your location, contacts, and notifications, as these permissions are often necessary for full functionality.
With the app open and the watch in pairing mode, the app should automatically detect your watch. If not, within the app, look for a “Pair new device” or “Add device” option. Tap it and wait for the app to scan for nearby devices. Your watch should appear in a list. Tap on it to start the pairing process.
Your phone and watch will now exchange a passkey or a code. On the watch, you might see a 6 digit code, and on the phone, you’ll see the same code. Confirm that they match and tap “Pair” or “Connect” on both devices. This ensures a secure connection. After that, the app will sync your watch, which might take a few minutes. This sync includes setting up your profile, transferring settings, and installing any firmware updates.
If the app doesn’t detect your watch, try restarting both devices, make sure they are close together (within a few feet), and ensure the watch is in pairing mode. Also, check if your phone’s Bluetooth is working by trying to pair with another device.
After pairing, the app will guide you through initial setup steps. This includes setting up your watch face, choosing which notifications you want to receive, and connecting to health features like heart rate and sleep tracking. You might also be asked to set up a PIN or pattern lock for security.
Once setup is complete, you can start using your watch. Spend some time customizing it to your liking: change the watch face, rearrange app tiles, and adjust notification settings. You can also set up pay features if your watch supports them (like Google Pay or Samsung Pay). Remember to grant all necessary permissions for the best experience.
If you run into any issues, check the manufacturer’s support page or the app’s help section. Also, note that some watches require a software update right after pairing, which can take 15 to 30 minutes. Don’t interrupt this process.
Common reasons include: both devices not being in pairing mode, Bluetooth interference, incompatible phone (e.g., an iPhone trying to pair with an Android only watch), or the companion app not being installed or updated. Try restarting both devices, ensuring the watch is fully charged, and that you are within 10 feet of the phone. Check if your phone’s Bluetooth is working by connecting to another device.
No, the app does not need to be open all the time. Once paired, the watch works independently. However, the app must be running in the background to sync data like notifications and health stats. If you force stop the app, you might miss notifications and data sync until you reopen it.
Most smartwatches allow only one phone connection at a time. To pair with a new phone, you’ll need to factory reset the watch or remove it from your old phone’s app. Some watches support multiple watches per phone, but not multiple phones per watch.
If you’re still deciding on which smartwatch to buy, check out our best watches guide for honest comparisons and recommendations.
We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.
Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.