★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Pet Supplies › How to Install Regalo Easy Step Extra Tall Walk Thru Gate: A Step-by-Step Guide
Pet Supplies

How to Install Regalo Easy Step Extra Tall Walk Thru Gate: A Step-by-Step Guide

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: To install the Regalo Easy Step Extra Tall Walk Thru Gate, first measure your doorway width to ensure it fits (the gate expands from 29 to 36 inches, but pressure mount kits are available for wider openings). Then, position the gate in the doorway, extend it until the pressure cups are snug against the wall, and tighten the locking knobs on both sides. The gate comes pre-assembled, so no tools are needed for pressure mounting. For a more permanent installation, use the included hardware kit to screw the mounting brackets into the wall. Always ensure the gate is level and secure before letting kids or pets through.

Before You Start: What’s in the Box and What You Need

When you open the box, you’ll find the gate fully assembled, which is a huge time saver. Inside, you also get two pressure mount cups (already attached), a hardware kit with screws and wall anchors, and an instruction manual. For pressure mounting, you need absolutely no tools. For hardware mounting, you’ll need a drill, a screwdriver, and a level. The gate is designed to fit openings between 29 and 36 inches wide. If your doorway is wider, Regalo sells extension kits (sold separately) that add up to 6 inches. Always double check your doorway width before installation.

Step 1: Measure Your Doorway and Check Fit

Use a tape measure to get the exact width of the door frame at the point where you want the gate. The gate’s pressure cups are adjustable, but they need to be at least slightly compressed to hold firmly. If the opening is slightly over 36 inches, you’ll need an extension. If it’s under 29 inches, this gate won’t work safely. Also, consider the surface: the pressure cups work best on flat, smooth surfaces. If you have textured walls or baseboards, you may need to use the hardware mounting method for stability.

Step 2: Pressure Mounting (No Tools)

This is the most common method and takes less than a minute. Hold the gate in the doorway at the desired height. The gate should be level; use a bubble level if you have one. Then, turn the locking knobs at the top and bottom of the gate (usually on the side with the walk-through door) clockwise to extend the pressure cups against the door frame. Keep turning until they are firmly pressed. Give the gate a gentle shake to test stability. If it wobbles, tighten a bit more. The key is to ensure the cups are evenly compressed on both sides. Once secure, you can use the walk-through door. Remember, pressure mounting is not recommended for rental properties if you’re concerned about leaving marks, but the cups have rubber pads to minimize damage.

Step 3: Hardware Mounting (Permanent)

If you want a more permanent solution, especially for a top-of-stairs installation (though this gate is not certified for top of stairs, so always use at bottom or between rooms), you can use the hardware method. First, mark the screw holes on the wall using a pencil. Hold the gate in place and mark through the brackets. Then, drill pilot holes and insert wall anchors if you’re mounting into drywall. Screw the brackets into the wall, then attach the gate to the brackets. This method provides a rock-solid hold but requires you to fill holes when you remove the gate. Always follow the manufacturer’s instructions for screw placement to avoid damaging the gate.

Tips for a Smooth Installation and Common Mistakes

One common mistake is not reading the manual before starting. Another is over-tightening the pressure knobs, which can cause the gate to warp or the cups to slip. Always test the gate after installation by pushing on the center. Also, make sure the walk-through door swings in the direction you want. You can reverse the door swing by moving the hinge pin. For doorways with baseboards, you may need to adjust the pressure cups to sit just above the baseboard to get a flat surface. If you’re using the gate for pets, consider the height: this gate is extra tall (36 inches), which is great for large dogs, but small pets might slip through the bars if they’re skinny. And if you’re looking for alternatives, you might want to check out our best pet gates guide for other options based on your needs.

Understanding Sizing and Fit for Different Openings

Getting the right fit is critical for safety and function. The Regalo Easy Step Extra Tall Walk Thru Gate is designed for openings between 29 and 36 inches wide. However, the actual usable width can be slightly less because the pressure cups need to be compressed to create a secure hold. If your opening is at the maximum 36 inches, you may find that the gate feels loose even when fully extended. In that case, an extension kit is recommended. Extension kits add up to 6 inches, allowing the gate to fit openings up to 42 inches. When using an extension, you must attach it to the gate before installation. Also, note that the gate is 36 inches tall, which is taller than many standard gates (usually around 30 inches). This extra height is beneficial for containing large dogs or toddlers who might try to climb. But if your doorway has a low header or a sloped ceiling, ensure there is enough clearance above the gate for the walk-through door to swing open without hitting anything. Measure the height of your opening from floor to the top of the frame. The gate itself is 36 inches tall, so you need at least that much clearance. If you have a very tall opening, the gate will still work, but it may look small in proportion. For openings that are unusually wide or tall, consider a custom gate or a different model.

Maintenance and Long-Term Care

To keep your gate working smoothly and safely, regular maintenance is essential. At least once a month, check the tightness of the pressure knobs. Over time, the pressure can loosen due to temperature changes, humidity, or repeated use. Simply turn the knobs clockwise to tighten. Also, inspect the rubber pads on the pressure cups for wear or damage. If they become cracked or flattened, they may not grip as well. Replacement pads are available from the manufacturer. Clean the gate with a damp cloth and mild soap. Avoid using abrasive cleaners or solvents, as they can damage the finish. The gate is made of steel with a powder-coated finish, which is durable but can chip if knocked hard. If you notice any chips, touch them up with a matching paint to prevent rust. For hardware-mounted gates, check the screws periodically to ensure they haven’t loosened. If you have a pet or child who likes to hang on the gate, this can put extra stress on the mounting points. Teach them not to climb or hang on the gate. Also, lubricate the hinge and latch mechanism with a silicone-based lubricant if it starts to squeak or become stiff. Do not use oil-based lubricants, as they can attract dirt. If you plan to store the gate, keep it in a dry place and avoid stacking heavy items on top of it. With proper care, this gate can last for many years and be passed down to other families.

Common Mistakes to Avoid During Installation

Even though installation is straightforward, several mistakes can compromise safety. First, not measuring the opening correctly. Always measure at the narrowest point, which is often at the baseboards. If you measure at the widest point, the gate may not fit. Second, ignoring the need for a level. If the gate is not level, the walk-through door may not latch properly, and the gate may not swing freely. Use a bubble level during installation. Third, over-tightening the pressure knobs. This can cause the gate to bow or the cups to slip, especially on drywall. Tighten until snug, then test. Fourth, mounting on a weak surface. Pressure-mounted gates should not be used on drywall alone if the gate is frequently bumped. The pressure cups can damage the drywall or lose grip. For drywall, use the hardware mounting method with wall anchors. Fifth, installing at the top of stairs. This gate is not certified for top-of-stairs use. Using it there could be dangerous if a child leans on it. Always use a gate that is specifically designed for stairs at the top. Sixth, forgetting to check the gate after installation. Push on it firmly to ensure it holds. If it moves, tighten or adjust. Seventh, not considering the direction of the door swing. The walk-through door can be reversed, but you need to do this before installation. Make sure it swings away from stairs or hazards. Finally, not reading the manual. The manual contains specific instructions and warnings that are important for safety. Following these tips will help you avoid common pitfalls and ensure a secure installation.

Frequently Asked Questions

Can I install this gate without drilling holes?

Yes, the gate is designed for pressure mounting, which requires no drilling. Just extend the pressure cups until they’re snug. However, for a more permanent installation, hardware mounting is available.

What if my doorway is wider than 36 inches?

You can purchase Regalo extension kits, which add up to 6 inches of width, allowing the gate to fit openings up to 42 inches. Make sure to attach the extension before installation.

Is this gate suitable for use at the top of stairs?

No, the Regalo Easy Step Extra Tall Walk Thru Gate is not certified for top-of-stairs use. It’s best used in doorways or at the bottom of stairs. For top-of-stairs, look for a gate that is specifically certified for that purpose.

Always remember to check the gate regularly for tightness and wear, as children and pets can loosen the pressure over time. With careful installation, this gate will serve you well for years.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.