How to Clean the Breville Juice Fountain Cold Plus Tops (Step-by-Step)

The short answer: To clean the Breville Juice Fountain Cold Plus tops, disassemble the juicer, rinse all parts under warm water, and wash them with a soft sponge and mild dish soap. For stubborn pulp, use a soft brush or the cleaning tool provided. Avoid abrasive scrubbers and never submerge the motor base. Dry all parts thoroughly before reassembling.

Understanding the Parts of Your Breville Juice Fountain Cold Plus

The Breville Juice Fountain Cold Plus comes with several key components that need regular cleaning: the juicer cover (top), the pulp container, the juice jug, the filter basket, and the cutting disc. The “tops” likely refer to the cover and possibly the lid of the juice jug. Each part has specific cleaning needs. The filter basket is the most critical to clean because it captures the pulp and can clog if left dirty. Always refer to your user manual for part names and disassembly instructions.

Step-by-Step Cleaning Process for the Tops and Other Parts

Here is a detailed, step-by-step method to clean your juicer effectively:

1. Unplug and disassemble: Always ensure the juicer is unplugged. Remove the juice jug, pulp container, and the cover (top). Set aside the motor base (do not get it wet).
2. Rinse immediately: The best time to clean is right after juicing. Rinse the cover, pulp container, and juice jug under warm running water to remove loose pulp and juice residue.
3. Wash with mild soap: Fill your sink with warm water and add a few drops of mild dish soap. Use a soft sponge or cloth to wash all parts, including the underside of the cover, the pulp container, and the juice jug. Pay special attention to the filter basket and cutting disc; use the soft brush that came with the juicer to scrub away pulp from the fine mesh.
4. Use the cleaning tool: The Breville includes a special cleaning brush designed to clean the filter basket. Use it to dislodge any stubborn pulp. For the cover, you can also use a bottle brush to reach into the chute.
5. Rinse thoroughly: Rinse all soapy parts under clean running water to remove any soap residue. Soap residue can affect the taste of your next juice.
6. Dry completely: Pat dry with a clean towel or let all parts air dry on a drying rack. Ensure every part is completely dry before reassembling to prevent mold and bacteria growth.

Dealing with Stubborn Pulp and Stains

Sometimes pulp can dry and stick to the tops or the filter. To loosen stubborn pulp, soak the parts in warm soapy water for 10 to 15 minutes before scrubbing. For tough stains (like carrot or beet juice), you can create a paste of baking soda and water, apply it to the stained areas, let it sit for a few minutes, then scrub gently. Avoid using bleach or harsh chemicals, as they can damage the plastic and leave residues. Also, avoid putting any parts in the dishwasher unless the manual explicitly says they are dishwasher safe; high heat and harsh detergents can warp or discolor plastic parts.

Daily Maintenance and Quick Cleaning Tips

To make cleaning easier every day, follow these quick tips:

• Rinse parts immediately after use. Dried pulp is much harder to remove.
• Use the cleaning brush immediately after rinsing to remove pulp from the filter basket.
• Keep a spray bottle of water and a microfiber cloth near the juicer to wipe down the exterior and the top after each use.
• Once a week, do a deeper clean with a baking soda solution to remove any lingering odors or stains.
• Always store the juicer fully assembled or with parts separated but dry to prevent dust accumulation.

If you are looking for a new juicer or comparing models, check out our best juicers guide for honest comparisons and recommendations.

Common Mistakes to Avoid When Cleaning Your Juicer

Many people make mistakes that can damage their juicer or reduce its lifespan. Avoid the following:

• Submerging the motor base: Never immerse the base in water. Wipe it with a damp cloth only.
• Using abrasive scrubbers: Steel wool or harsh scouring pads can scratch the plastic and mesh, making it easier for pulp to stick.
• Ignoring the filter basket: A clogged filter basket reduces juice yield and may cause the machine to overheat.
• Putting parts in the dishwasher: Unless stated in the manual, avoid the dishwasher. The high heat can warp parts, and the detergent can be abrasive.
• Leaving parts wet: Moisture can cause mold and mildew. Always dry parts completely.

Frequently Asked Questions

Can I put the Breville Juice Fountain Cold Plus parts in the dishwasher?

Most parts are not dishwasher safe. The manual recommends hand washing. The high heat and harsh detergents in dishwashers can warp or discolor the plastic components, and may damage the fine mesh of the filter basket. Stick to hand washing with mild soap and water.

How often should I clean the juicer tops?

You should rinse and clean the tops and all parts after every use. If you use the juicer daily, a quick rinse and soap wash each time is sufficient. Once a week, do a deeper clean with baking soda to prevent stains and odors.

What is the best way to remove pulp from the filter basket?

The best way is to use the cleaning brush provided, while running warm water over the basket. Soak the basket in warm soapy water for a few minutes if pulp is dried. Gently scrub in a circular motion to dislodge pulp from the mesh holes.

Keep readingContinue the research