★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Dog Grooming Clippers › How to Clean and Oil Dog Clippers: Extend Their Lifespan
Dog Grooming Clippers

How to Clean and Oil Dog Clippers: Extend Their Lifespan

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: Clean your clipper blades after every use with a brush and a quick wipe, then apply 1 to 2 drops of clipper oil to the blade’s moving parts and run the clipper for a few seconds to distribute it. Deep clean and re-oil the blades weekly if you groom multiple dogs or frequently.

Why Cleaning and Oiling Matters

Dog grooming clippers are a significant investment, and like any precision tool, they require regular maintenance to perform at their best. Without proper care, blades become dull, overheat, and can pull or snag your dog’s coat, causing discomfort. Moreover, accumulated hair, dirt, and dander can harbor bacteria and cause skin irritation. Regular cleaning and oiling not only extend the lifespan of your clippers but also ensure a safe, comfortable grooming experience for your pet.

Neglecting maintenance can lead to costly repairs or premature replacement. A well-maintained clipper can last for years, even a decade, while a neglected one might need new blades within months. The process is simple, takes only a few minutes, and uses inexpensive supplies. Let’s dive into the step-by-step process.

What You Need for Cleaning and Oiling

Gather these basic supplies before starting:

  • Clipper brush: Most clippers come with a small brush, but any stiff-bristled brush works.
  • Soft cloth: A lint-free cloth or microfiber towel for wiping.
  • Clipper oil: Specifically designed for clipper blades; it’s lightweight and non-toxic. Avoid using WD-40 or household oils as they can be harmful if ingested or cause skin irritation.
  • Optional: Clipper coolant or blade wash (non-flammable), screwdriver (if you need to remove the blade for deep cleaning).

Always refer to your clipper’s manual for specific instructions, as some models have removable blades that require different handling.

Step-by-Step Cleaning Process

Follow these steps after each grooming session:

  1. Unplug the clipper: Always ensure the clipper is off and unplugged before cleaning to prevent accidents.
  2. Brush off hair: Use the clipper brush to gently remove hair from the blade’s teeth and the crevices around it. Work in the direction of the teeth to dislodge stubborn hairs.
  3. Wipe the blade: With a soft cloth, wipe the blade surfaces to remove any remaining debris, dander, or oil residue.
  4. Deep clean (optional but recommended weekly): If your clipper has a detachable blade, remove it according to the manual. Use a blade wash or a small bowl of isopropyl alcohol to soak the blade for a few minutes to dissolve hardened grease and hair. Be sure to dry the blade completely before oiling. For non-detachable blades, use a cotton swab dipped in alcohol to clean the blade edges and pivots carefully.

How to Oil Your Clipper Blades

Oiling lubricates the moving parts, reduces friction, prevents rust, and keeps the clipper running cool and quiet. Here’s the proper technique:

  1. Apply oil: With the clipper off, place 1 to 2 drops of clipper oil directly on the blade’s cutting surfaces, near the pivot point or the holes on the blade. Do not over-oil; excess oil will attract more dirt and hair.
  2. Distribute the oil: Turn the clipper on and let it run for 5 to 10 seconds. This spreads the oil evenly across the blades.
  3. Wipe off excess: Turn off the clipper and wipe away any excess oil with a cloth. You want a thin film, not a pool.

A quick rule: if you groom your dog once a week, oil before each use. If you’re a professional or groom multiple dogs, oil after every dog and deep clean daily.

Troubleshooting Common Issues

Even with regular maintenance, you might encounter issues. Here are solutions:

  • Clipper pulls or tugs: This often indicates dull blades. Try oiling first; if the problem persists, the blade may need sharpening or replacement.
  • Clipper runs hot: Overheating is usually due to lack of oil or debris buildup. Clean and oil thoroughly. If it still overheats, check for worn parts.
  • Loud or rattling noise: This can be a sign of loose screws or a misaligned blade. Tighten any screws, but don’t over-tighten. If noise continues, consult a professional.
  • Rust spots: Rust can develop if blades are stored damp. Always dry blades after cleaning, and store in a dry place. Apply a light coat of oil if storing for an extended period.

If you notice excessive wear or damage, consider replacing the blade set. For a comprehensive guide on choosing durable clippers, check our Best Dog Grooming Clippers 2026: Andis & More for Every Budget to find replacements that fit your needs.

Maintenance Schedule and Storage Tips

To maximize lifespan, follow this simple schedule:

  • After every use: Brush off hair, wipe blades, and oil.
  • Weekly: Deep clean blades with a blade wash or alcohol.
  • Monthly: Remove blades (if possible) and inspect for wear, then sharpen or replace as needed.

Proper storage is just as important. Keep your clippers in a dry place, ideally in a case or pouch. Avoid storing in humid areas like a bathroom. If you won’t be using them for a while, apply a light coat of oil to the blades to prevent rust.

By integrating these simple habits into your grooming routine, you’ll save money on replacements and ensure your furry friend enjoys a pleasant grooming experience every time. Remember, a little care goes a long way.

Frequently Asked Questions

Q: Can I use vegetable oil or WD-40 to oil my clippers? A: No. Vegetable oil becomes sticky and rancid, attracting debris. WD-40 is a solvent and not a lubricant; it can dissolve the existing lubricant and cause damage. Always use a dedicated clipper oil, which is formulated for high-speed blades and is safe for pets.

Q: How often should I replace clipper blades? A: It depends on usage. For home groomers, blades can last 6 months to a year with regular oiling. For professionals, replace every few months. Signs of dullness include pulling, uneven cuts, or increased noise. If oiling doesn’t improve performance, it’s time for a new blade.

Q: Can I clean the blades with water? A: No. Water promotes rust and can damage the motor. Use a blade wash or isopropyl alcohol for deep cleaning, and always dry thoroughly before oiling.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.