★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Noise Cancelling Headphones › How to Clean Noise Cancelling Headphones: 8 Pro Steps for Longevity
Noise Cancelling Headphones

How to Clean Noise Cancelling Headphones: 8 Pro Steps for Longevity

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: Clean your noise cancelling headphones every 2 to 4 weeks using a dry microfiber cloth, isopropyl alcohol wipes for ear cushions, and a soft brush for ports. Regular maintenance, including proper storage and battery care, will prevent buildup and preserve performance.

Why Regular Cleaning Matters for Noise Cancelling Headphones

Noise cancelling headphones are an investment, often priced between $150 and $500. But even the best models can degrade quickly if you ignore hygiene. Ear cushions absorb sweat, oils, and dead skin cells, which can harden the foam and reduce comfort. More importantly, dust and earwax can clog the tiny microphones used for active noise cancellation (ANC). A blocked microphone leads to reduced noise reduction, which you might mistake for a hardware failure. Regular cleaning prevents that and maintains the seal that’s essential for low-frequency noise blocking.

Think about it: you wear these devices for hours, they touch your skin, and they trap heat. Bacteria can grow, causing skin irritation. A clean pair also keeps the warranty valid, since most manufacturers consider excessive dirt as neglect. So, a simple routine every few weeks is worth the effort.

Step by Step: How to Clean Your Noise Cancelling Headphones Safely

Follow this method for over-ear and on-ear models. For in-ear (true wireless) earbuds, the steps are similar but with smaller tools.

What You’ll Need

  • Microfiber cloth (lint free)
  • Soft bristle brush (like a clean makeup brush or toothbrush)
  • Isopropyl alcohol wipes (70% or less) or a mild soap solution
  • Cotton swabs
  • Toothpick or SIM ejector tool (for crevices)
  • Blu Tack or sticky putty (for ports and mesh)

Cleaning Process

  1. Power off and disconnect: Turn off the headphones and remove any cables or dongles. If they’re wireless, ensure they’re not charging.
  2. Remove ear cushions: Check your manual, but most cushions are detachable. Gently twist or pull them off. If they’re not removable, you can still clean them in place, but be careful with moisture.
  3. Dry brush first: Use the soft brush to sweep away loose dust and debris from the ear cushions, headband, and the speaker mesh. This prevents rubbing particles into the fabric.
  4. Wipe surfaces: Dampen a microfiber cloth with a little water or a 70% isopropyl alcohol wipe (not dripping). Wipe the outer surfaces, including the headband and ear cup exteriors. For the leather or protein leather cushions, use a dedicated leather cleaner if available, but alcohol wipes work for most.
  5. Clean the mesh and ports: Use a dry cotton swab to gently remove earwax from the speaker mesh. For the ANC microphones (tiny pinholes), use a toothpick or Blu Tack to lift out debris. Never insert anything sharp or wet into the ports.
  6. Wash cushions (if removable): If your cushions are fabric or memory foam, you can hand wash them with mild soap and water. Rinse thoroughly and air dry completely (at least 24 hours) before reattaching. Avoid machine washing or drying as it can warp the foam.
  7. Wipe the headband: The headband often collects hair product and sweat. Wipe with a damp cloth.
  8. Reassemble: Once everything is dry, reattach cushions and check that they click firmly.

Maintenance Tips for Noise Cancelling Headphones

Cleaning is just one part. Here are essential habits to extend lifespan:

  • Store properly: Always use the provided hard case. It prevents physical damage and dust accumulation. If you don’t have a case, store them on a stand or hanging hook, not on a desk where they can be scratched or stepped on.
  • Manage the cable: If wired, avoid wrapping the cable tightly around the headphones. Coil it loosely and use a velcro strap.
  • Battery care: For wireless models, avoid letting the battery drain to 0% regularly. Lithium ion batteries last longer if you keep them between 20% and 80%. Charge with a quality USB cable and avoid cheap chargers that may deliver inconsistent voltage.
  • Avoid extreme temperatures: Heat can degrade the ear cushion adhesive and battery. Don’t leave them in a hot car or near radiators. Cold can make plastics brittle.
  • Handle with clean hands: Wash your hands before use to minimize oil transfer.

Common Mistakes That Damage Noise Cancelling Headphones

Avoid these errors to prevent premature failure:

  • Submerging in water: Even if they’re IPX rated, don’t soak them. Moisture can get into the electronics and corrode connections.
  • Using harsh chemicals: Bleach, ammonia, or acetone will strip coatings and damage plastics.
  • Overusing wet wipes: If you use wet wipes too often, the moisture can seep into the mesh and affect the ANC microphones. Always wring them out.
  • Poking holes in mesh: The fine mesh over the drivers is delicate. Use gentle pressure.
  • Neglecting the earwax: Earwax is acidic and can corrode the mesh over time. Clean it regularly.

Regular maintenance is especially critical if you use your headphones during workouts or commutes. For a list of durable models that are easier to clean, check our 10 Best Noise Cancelling Headphones for 2026: Top Travel Picks.

How Often Should You Clean Each Part?

Frequency depends on usage. Here’s a practical schedule:

  • Ear cushions and headband: Wipe down weekly if used daily; deep clean monthly.
  • Speaker mesh: Check every two weeks for earwax; clean as needed.
  • ANC microphones: Inspect monthly; clean if you notice reduced noise cancellation.
  • Carrying case: Vacuum or wipe monthly to prevent dust transfer.
  • Charging ports: Use a dry brush every few months to remove lint.

If you notice a decrease in noise cancelling performance, it’s often due to clogged microphones. A quick clean can restore it. Also, replace ear cushions every 6 to 12 months if they start flaking or lose their shape. This is a normal wear item, not a defect.

Frequently Asked Questions

Can I use alcohol on noise cancelling headphones? Yes, but use isopropyl alcohol wipes at 70% or less, and avoid getting liquid into openings. They evaporate quickly and kill bacteria, but they can damage some plastics over time, so use sparingly.

How do I clean the earwax out of the tiny mesh holes? Use a dry cotton swab or a toothpick to gently scrape the surface. For deeper clogs, use Blu Tack pressed onto the mesh to pull out debris. Never use water or compressed air, which can push wax further in.

Why does my noise cancelling suddenly sound weaker? Most likely, the ANC microphones are dirty. Check for visible debris, clean them, and test again. If that doesn’t help, check if the ear cushions are worn out and breaking the acoustic seal. Also, ensure the headphones are fully charged, as low battery can affect ANC performance.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.