★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Beauty & Grooming › How to Clean and Dry a Bath Pillow to Prevent Mold and Mildew
Beauty & Grooming

How to Clean and Dry a Bath Pillow to Prevent Mold and Mildew

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: To prevent mold and mildew on your bath pillow, clean it after every use with a mild soap or vinegar solution, rinse thoroughly, squeeze out excess water, and dry it completely in a well ventilated area or in the dryer on a low heat setting. For deeper cleaning, use a bleach solution or put it in the washing machine, but always check the manufacturer’s instructions first.

Why Bath Pillows Get Moldy

Bath pillows are designed to be used in water, but they aren’t waterproof. The foam or fabric inside absorbs water, and if you don’t dry it properly, moisture gets trapped, creating the perfect environment for mold and mildew to grow. Mold not only looks gross and smells musty, but it can also cause skin irritation and respiratory issues. The key is to establish a routine that removes moisture and allows the pillow to dry completely between uses.

Daily Cleaning Routine: The 3 Step Method

After each bath, follow this simple three step process to keep your pillow fresh.

Step 1: Rinse and Squeeze

Take the pillow out of the water and rinse it under the shower or faucet to remove any soap, body oils, and skin cells. Then, gently squeeze the pillow to expel as much water as possible. Avoid wringing or twisting, which can damage the pillow’s shape and the internal foam.

Step 2: Mild Soap or Vinegar Cleanse

Once a week, or more often if you use the pillow frequently, give it a gentle wash. Mix a few drops of mild dish soap or a solution of one part white vinegar to three parts water. Dip a soft cloth or sponge into the solution and wipe down the entire surface of the pillow. Pay special attention to any creases or suction cup areas where gunk can accumulate. Rinse thoroughly to remove all soap residue, as leftover soap can attract dirt and cause the pillow to become sticky.

Step 3: Dry Completely

After rinsing, press the pillow between two clean towels to absorb excess moisture. Then, hang it in a well ventilated area, away from direct sunlight (which can degrade the material). If your bathroom has a fan or window, use it. For faster drying, you can use a hairdryer on a cool or low heat setting, holding it a few inches away. The goal is to ensure the pillow is completely dry before its next use, which can take 12 to 24 hours depending on humidity.

Deep Cleaning Methods for Stubborn Stains or Odors

Over time, even with regular cleaning, you may notice stubborn stains or a persistent musty smell. That’s when you need a deeper clean.

Bleach Solution: For a mold kill, mix one tablespoon of bleach with one gallon of water. Soak the pillow in this solution for about 15 minutes, then rinse very thoroughly until no bleach smell remains. Bleach can be harsh, so this method is best for tough cases and only if the pillow material is bleach safe (check the label).

Washing Machine: Many bath pillows are machine washable. Place the pillow in a mesh laundry bag to protect it, and wash on a gentle cycle with cold water and a small amount of mild detergent. Do not use fabric softener, as it can break down the waterproof coating. After the cycle, remove the pillow and air dry completely. Never put a bath pillow in a dryer unless the manufacturer explicitly says it’s safe, as high heat can melt the foam or ruin the suction cups.

Baking Soda Paste: For odors, make a paste of baking soda and water, apply it to the pillow, let it sit for 30 minutes, then rinse off. Baking soda neutralizes odors and is gentle on materials.

Drying Techniques: What Works Best

Proper drying is the most critical step in preventing mold. Here are the most effective methods:

Air Drying: The safest and most common method. Hang the pillow from a shower rod or clothesline, or lay it flat on a towel in a dry area. Ensure airflow by leaving a window open or using a fan. Turn the pillow over after a few hours to dry both sides. This can take up to a day, so it’s best to do it after your last bath of the day.

Dryer on Low Heat: Some bath pillows are dryer safe, but you must use the lowest heat setting and add a couple of clean towels to help absorb moisture. Check the pillow frequently to avoid overheating. If you see any signs of melting or warping, stop immediately. This method is faster, but not all pillows can handle it.

Hairdryer or Fan: If you need your pillow ready for the next bath quickly, use a hairdryer on a cool setting or a small fan. Hold the hairdryer about six inches away and move it around to evenly distribute the heat. This can cut drying time to 30 minutes or less.

No matter which method you choose, make sure the pillow is 100% dry before storing it or using it again. A damp pillow is a breeding ground for mold.

Extra Tips to Extend Your Bath Pillow’s Life

Prevention is better than cure. Here are some habits that will keep your bath pillow mold-free for longer:

  • Shake it out: After each use, give the pillow a good shake to remove excess water and loosen any debris.
  • Use a towel barrier: Place a thin, quick drying towel between your head and the pillow to reduce the amount of body oils and hair products that soak in.
  • Rotate the pillow: If your pillow has suction cups, sometimes they lose their grip. Rotating it slightly can help, but that’s not mold related. More importantly, rotate which end you use to even out wear and tear.
  • Consider a second pillow: If you bathe daily, having two pillows allows one to dry fully while you use the other.
  • Check the manufacturer’s care instructions: Different materials require different care. Some pillows have a waterproof cover that can be removed and washed separately. Always refer to the label for specific guidance.

If you’re shopping for a new bath pillow, look for ones made with quick drying materials like open cell foam or mesh fabric. You can find a selection of well reviewed options in our best bath pillows buying guide that highlights features like durability and ease of cleaning.

Frequently Asked Questions

Q: Can I soak my bath pillow in vinegar to remove mold?

A: Yes, vinegar is a natural disinfectant. Mix equal parts white vinegar and water and soak the pillow for 30 minutes, then rinse thoroughly. For stubborn mold, you can use undiluted vinegar, but test it on a small area first to ensure it doesn’t damage the material.

Q: How often should I deep clean my bath pillow?

A: It depends on usage. If you use it daily, deep clean it every two weeks. If you use it a few times a week, once a month is enough. If you notice any musty smell or visible spots, clean it immediately.

Q: Is it safe to put my bath pillow in the dishwasher?

A: Not recommended. Dishwashers use high heat and strong detergents that can warp or degrade the pillow’s materials. Stick to hand washing or a gentle machine cycle if the label allows.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.