★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Appliances › Why Is My Electric Range Oven Not Heating but the Stove Top Works?
Appliances

Why Is My Electric Range Oven Not Heating but the Stove Top Works?

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: If your electric range’s stove top works but the oven doesn’t heat, the problem is usually with the oven’s heating element, the oven temperature sensor, the bake or broil element, or the control board. It’s less likely to be a power supply issue, since the stove top works. Start by checking the oven element for visible damage, then test the sensor and control settings. If you’re unsure, a multimeter can help diagnose, or you may need to call a professional. For reliable replacement options and guidance, check out our best electric ranges guide.

1. First, Confirm the Obvious: Oven Settings and Controls

Before diving into parts, make sure you haven’t accidentally set a timer or delay start. Many ovens have a “delay bake” feature that can make it seem like the oven isn’t heating. Check your user manual and ensure the oven is set to “Bake” or “Broil” with the correct temperature. Also, verify that the oven door is fully closed; most ovens won’t heat if the door is ajar. If it’s a newer model, a child lock might be on. These simple checks cost nothing and can save you a service call.

2. Inspect the Bake and Broil Elements

The most common culprit is a burnt-out heating element. Look at the bake element at the bottom of the oven and the broil element at the top. If you see any blistering, bubbling, or a visible break in the coil, that’s the problem. Even if it looks fine, the element might be internally broken. You can test it with a multimeter set to resistance (ohms). Disconnect power first, then touch the probes to the element’s terminals. A good element will show low resistance (around 10-50 ohms). If you get infinite resistance, it’s dead. Replacing an element is usually DIY-friendly: remove the screws holding it in place, disconnect the wires, and install the new one. Always buy the exact part number for your model.

3. Check the Oven Temperature Sensor (RTD)

If the element looks fine, the next suspect is the oven temperature sensor, usually a metal tube at the back of the oven. This sensor tells the control board the oven’s temperature. If it’s faulty, the oven might not heat at all because the board thinks it’s already hot. To test, unplug the range, remove the sensor, and measure its resistance with a multimeter. A typical sensor reads about 1080 ohms at room temperature. If it’s significantly off or shows open/shorted, replace it. This is a relatively inexpensive part and easy to swap out.

4. Examine the Control Board and Wiring

If both elements and the sensor are good, the issue might be in the control board or the wiring connecting to the oven. Look for loose or burnt wire connections at the back of the oven. Also, a faulty control board could fail to send power to the heating element. Testing the board requires more expertise; you might need a technician. However, before calling, check if your oven has a reset button (some models have a hidden one). Also, try turning off the circuit breaker for 1 minute and turning it back on to reset the electronics.

5. Consider the Oven Selector Switch (if applicable)

On some electric ranges, a mechanical selector switch controls whether the oven or stove top receives power. If it’s worn out, it might not make proper contact, so the oven doesn’t heat. If your range has a knob for oven functions (bake, broil, etc.), you can test the switch with a multimeter for continuity. Replacing this switch is more involved but doable. If you’re not comfortable, a pro can do it quickly.

6. When to Call a Professional

If you’ve checked elements, sensor, wiring, and controls, and still no heat, it’s time to call an appliance repair service. A technician can diagnose relay or control board failures accurately. Also, if you’re not comfortable working with electrical components, it’s safer to get help. Remember, an oven that doesn’t heat can sometimes be a fire hazard if left unchecked. And if you’re considering a replacement, our range buying guide can help you pick a reliable model that might avoid these issues.

Frequently Asked Questions

Q: Can a broken oven igniter (on gas models) cause this? I have an electric range though.

A: For electric ranges, there’s no igniter. The heating elements are powered directly by 240V. So this problem is strictly electrical. Gas ranges have a separate issue where the igniter might be weak. But since you specified electric, focus on elements and controls.

Q: My oven light comes on and the stove top works, but the oven doesn’t heat. Does that rule out power issues?

A: Yes, it rules out a complete power failure. The stove top uses 240V, and the oven also uses 240V. If the stove top works, power is reaching the range. The problem is isolated to the oven circuit, which is why you check the element, sensor, and control board.

Q: Could a dirty oven affect heating?

A: A heavy layer of grease or food debris on the element can cause hotspots and premature failure. It’s always good to clean the oven regularly, but if it’s not heating, cleaning alone won’t fix it if the element is already burned out.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.