★ Independently researched & tier-ranked — no paid placements · Updated November 2026
Home › Coffee & Drinks › How to Clean a Brentwood Personal Blender (And Avoid Mold)
Coffee & Drinks

How to Clean a Brentwood Personal Blender (And Avoid Mold)

Disclosure: As an Amazon Associate we earn from qualifying purchases. We may earn a commission if you buy through our links, at no extra cost to you.

The short answer: To clean a Brentwood personal blender, immediately rinse the jar and blade assembly under warm water after use, then add a drop of dish soap and warm water, blend for 30 seconds, rinse thoroughly, and air-dry upside down. For deep cleaning, disassemble the rubber gasket and clean it separately. Avoid submerging the base in water.

Why Mold Is a Common Problem

Personal blenders like the Brentwood are convenient for quick smoothies, but their small size and tight seals can trap moisture and food particles. If you don’t clean them promptly, mold can develop within 24 to 48 hours, especially in the gasket, under the blades, and in the lid. Mold not only ruins the taste of your drinks but can also be a health hazard. The key is to clean after every use and dry thoroughly.

Step-by-Step Cleaning Routine

Follow these steps to keep your Brentwood blender fresh and mold-free:

  1. Rinse immediately: After pouring out your smoothie, rinse the jar and lid with warm tap water to remove loose residue.
  2. Soap and blend: Fill the jar halfway with warm water and add a drop of dish soap. Place the lid on, then run the blender for 20 to 30 seconds. This dislodges stuck particles from under the blades.
  3. Disassemble for deep clean: At least once a week, unscrew the blade assembly from the jar (if your model allows). Remove the rubber gasket or O-ring. Wash each part with warm soapy water using a bottle brush or a small sponge.
  4. Clean the base: Wipe the motor base with a damp cloth only. Never immerse the base in water or run it under the tap, as this can damage the motor.
  5. Dry completely: Shake off excess water, then place all parts on a drying rack, upside down, with the gasket and lid separated. Ensure everything is bone dry before reassembling.

If you notice any musty smell, do a quick sanitizing rinse with a mixture of one tablespoon of white vinegar and one cup of water. Blend for 10 seconds and rinse thoroughly.

How to Disassemble Your Brentwood Blender Safely

Not all Brentwood personal blenders are identical, but most have a jar that twists onto a blade base. Here’s a general guide:

  • Unplug the blender.
  • Hold the jar firmly with one hand and twist the blade assembly counterclockwise to unscrew it. If it’s stuck, run the jar under warm water for a minute to loosen dried residue.
  • Once removed, you’ll see a clear rubber seal (gasket). Gently pull it off. It is designed to be removable for cleaning.
  • If your model has a fixed blade (not removable), use a narrow brush or a Q-tip to clean around the blades.

Always check your owner’s manual for specific instructions. But in general, the gasket is the most hidden spot for mold, so pay extra attention there.

Daily vs. Deep Cleaning: What’s Enough?

For everyday use, a quick rinse and a soapy blend should suffice. However, if you’re making thick smoothies with leafy greens, nut butters, or protein powder, you’ll need a more thorough cleaning more often. Here’s a simple schedule:

  • After each use: Rinse and soapy blend, then air-dry.
  • Every 3 to 4 uses: Disassemble and wash all parts with a brush.
  • Once a month: Soak the jar, blades, and gasket in warm water with a teaspoon of baking soda or a denture tablet to remove stains and odors.

Remember, the longer you wait, the harder it is to clean. A quick wash now saves you from scrubbing later.

Common Mistakes That Lead to Mold

Even with regular cleaning, mold can sneak in. Avoid these pitfalls:

  • Leaving the blender assembled: Storing the jar with the lid on traps moisture. Always store with the lid off and the jar upside down.
  • Ignoring the lid: The lid’s inner rim can collect residue. Wash it in the sink or in the top rack of a dishwasher (if marked dishwasher safe).
  • Not drying before storage: A quick shake isn’t enough. Let everything air-dry for at least an hour.
  • Using harsh scrubbers: Steel wool or abrasive pads can scratch the plastic, creating hiding spots for bacteria. Stick to soft sponges.
  • Putting the base in the dishwasher: It will ruin the motor. Only the jar, lid, and blade assembly (if marked) are dishwasher safe.

If you’re looking for a blender with dishwasher-safe parts and an easier cleaning design, you might want to explore other options in our best smoothie cups guide.

Understanding Brentwood Personal Blender Models and Their Cleaning Differences

Brentwood offers several personal blender models, and cleaning procedures can vary slightly. The most common are the single-speed models with a 14-ounce jar and the larger 20-ounce versions with a travel lid. Some models have a removable blade assembly that unscrews from the jar, while others have a fixed blade base that requires more careful cleaning around the blades. Knowing your specific model helps you avoid damage and ensures thorough cleaning.

For models with a removable blade assembly, you can separate the blade from the jar by twisting counterclockwise. This exposes the gasket, which is a common mold hotspot. Fixed-blade models usually have a sealed base, meaning you cannot remove the blade. In that case, use a bottle brush with flexible bristles to reach under the blades, and run a soapy blend regularly to flush out residue.

Another difference is the lid design. Some lids have a drinking spout with a flip-top cap, which can trap smoothie residue in the hinge. Use a small brush or a toothpick to clean inside the spout and hinge area. If your lid has a silicone seal, remove it if possible and wash separately. Always consult your manual for model-specific instructions, as disassembling parts not meant to be removed can void your warranty.

Preventing Mold When Storing Your Brentwood Blender

Proper storage is just as important as cleaning to prevent mold. Even a perfectly clean blender can develop mold if stored in a damp, enclosed space. After cleaning, ensure all parts are completely dry. Air-drying upside down on a dish rack is effective, but you can also dry with a clean towel, especially the gasket and blade area. Once dry, store the jar with the lid off. If you must assemble it for space reasons, place a paper towel between the jar and lid to absorb any residual moisture.

Choose a storage location that is well-ventilated and not humid. Avoid storing the blender in a closed cabinet under the sink, where moisture levels are higher. If you live in a humid climate, consider storing the jar and lid separately in a cabinet with a moisture-absorbing packet. Also, never store the blender with the blade assembly attached if it’s still damp; this creates a perfect environment for mold growth.

For long-term storage, disassemble all removable parts, wash and dry them thoroughly, and store them loosely in a clean, dry place. Before using again, give the parts a quick rinse. This practice ensures your blender stays fresh and ready for your next smoothie.

How to Sanitize Your Brentwood Blender Beyond Soap and Water

While soap and water clean visible residue, sanitizing kills bacteria and mold spores that may linger. For a deeper clean, you can use natural sanitizers like white vinegar or hydrogen peroxide. Vinegar is effective against many types of mold and bacteria. To sanitize, mix one part white vinegar with one part water, fill the jar halfway, and blend for 30 seconds. Let it sit for 5 minutes, then rinse thoroughly. The smell dissipates as it dries.

Hydrogen peroxide (3% solution) is another option. Blend a mixture of one part hydrogen peroxide and two parts water for 30 seconds, then rinse well. Hydrogen peroxide breaks down into water and oxygen, leaving no harmful residue. For stubborn odors, a denture tablet dissolved in warm water can be used to soak the jar, blade, and gasket for 30 minutes. This is gentle yet effective.

After sanitizing, always wash with plain water and dry completely. Avoid mixing vinegar and hydrogen peroxide in the same container, as they can create a harmful gas. Also, do not use bleach unless specifically instructed by the manufacturer, as it can damage plastic and leave harmful residues. Always follow safety guidelines and ensure proper ventilation when using any cleaning agents.

Frequently Asked Questions

Can I put my Brentwood blender jar in the dishwasher?

Many Brentwood personal blender jars are marked dishwasher safe (top rack only). However, the blade assembly and gasket may warp or degrade over time. To be safe, hand wash those parts. If you’re unsure, check the bottom of the jar for the dishwasher-safe symbol.

How do I get rid of the musty smell from my blender?

Blend a solution of warm water and two tablespoons of baking soda for 30 seconds. Rinse thoroughly. If the smell persists, blend a cup of white vinegar and a cup of water, then rinse. Dry completely.

Is it safe to blend soapy water?

Yes, as long as you use a mild dish soap and rinse extremely well with plain water. Running a soapy blend is an effective way to clean under the blades without reaching into them.

How we rank

We don't accept free units or payment for placement. Our rankings combine verified manufacturer specifications, real owner feedback and availability, compared on one transparent S to C rubric.

Honesty note: We have not hands-on tested every product mentioned on this page. Where we have not personally used a product, any ranking referenced here is based on verified specs, aggregated owner feedback, availability and editorial comparison rather than a hands-on review.

Research-based comparison
Manufacturer specs & owner feedback
One transparent S–C rubric
Independently researched, no paid placements

Keep readingContinue the research

Update log

  • - Editorial and on-page review.
  • - Guide first published.